An Advanced Two Level Double Dual Boost Converter
K.Sneha, Velammal College of Engineering and Technology; T.Anitha ,; Shwetha Subburaj ,; B.Surrabhi ,
Interleaved DC-DC converter, DC input source, Driver circuit, MOSFET. Model of reliability
This proposed work has two converters connected in cascade to have output voltage 4 times of input voltage. This converter is a non-isolated boost converter, which can level up Dc voltage from 24 Vdc input voltage to 120 Vdc output voltages. This is adequate suitable in order to develop and apply with any dc output renewable energy source, such as pv generation system etc. The proposed converter has totally four modules of Dc boost converter, which are connected in parallel. At the same time, the switching devices are controlled by 90 degree shifting, due to an interleaving technique. This will lead to a smoother output dc current. Two modes of operation are available for interleaved boost converter: Half mode and Full mode operation. Based on the power loss efficiency of the converter the reliability of the converter can be calculated. In an interleaved boost converter high reliability is present and increase in power will lead to a decrease in the reliability.
-
[1] Behjati.H and A.Davoudi, “Reliability analysis framework for structural redundancy in power semiconductors,” IEEE Trans. Ind. Electron.,vol. 60, no. 10, pp. 4376–4386, Oct. 2013.
[2] Busca.C, R. Teodorescu, F. Blaabjerg, S. Munk-Nielsen, L. Helle, T.Abeyasekera, and P. Rodriguez, “An overview of the reliability prediction related aspects of high power IGBTs in wind power applications,”Elsevier Microelectron. Rel., vol. 51, pp. 1903–1907, 2011.
[3] Hegazy.O, J. V. Mierlo, and P. Lataire, “Analysis, modeling, and implementation of a multidevice Interleaved DC/DC converter for fuel cell hybrid electric vehicles,” IEEE Trans. Power Electron., vol. 27, no. 11,pp. 4445–4458, Nov. 2012.
[4] Lai.C.M , C. T. Pan, and M. Cheng, “A two-phase interleaved power factor correction boost converter with a variation-tolerant phase shifting technique,” IEEE Trans. Power Electron., vol. 29, no. 2, pp. 1032–1040,Feb. 2014.
[5] Wai R.J and B. H. Chen, “High-efficiency dual-input interleaved DC–DC converter for reversible power sources,” IEEE Trans. Power Electron.,vol. 29, no. 6, pp. 2903–2921, Jun. 2014.
[6] Song.Y and B.Wang, “Survey on reliability of power electronic systems,IEEE Trans. Power Electron., vol. 28, no. 1, pp. 591–604, Jan. 2013
[7] Wang.H and F. Blaabjerg, “Reliability of capacitors for DC-link applications in power electronic converters – An overview,” IEEE Trans. Ind.Appl., vol. 50, no. 5, pp. 3569–3578, Oct. 2014.
[8] Yang.Y, A. Bryant, P. Mawby, D. Xiang, L. Ran, and P. Tavner, “An industry-based survey of reliability in power electronic converters,” IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1441–1451, May/Jun. 2011.
Paper ID: GRDCF002108
Published in: Conference : International Conference on Innovations in Engineering and Technology (ICIET - 2016)
Page(s): 345 - 349
Published in: Conference : International Conference on Innovations in Engineering and Technology (ICIET - 2016)
Page(s): 345 - 349